, ,

LCD 16×2 Character LCD Display For Arduino

 570

It consists of a 1602 LCD 16×2  For Arduino white character blue back light LCD. The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

SKU: NME-LCD-1602-Display-Shield Categories: , ,

This is a 1602 LCD 16×2 Character LCD Display For Arduino Uno, Decimal, Duemilanove, and Free duino boards.

1602 16×2 Blue Character LCD Display For Arduino is a basic 16 character by 2 lines Alphanumeric display. This LCD 16×2 Character LCD Displayhas White text on a blue background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need Minimum 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4bit and 8 bit Mode.

Features :
  1. 16 Characters x 2 Lines
  2. Blue Backlight
  3. 5×7 Dot Matrix Character + Cursor
  4. HD44780 Equivalent LCD Controller/driver Built-In
  5. 4-bit or 8-bit MPU Interface
  6. Standard Type
  7. Works with almost any Microcontroller
Specifications:
ConstructionCOB (Chip-on-Board)
Display Format16×2 Characters
Display TypeSTN, Transflective, Positive
ControllerSPLC780D1 or equivalent controller
Interface8-bit Parallel Interface
LCD ColorBlack Text on Green Backlight
BacklightLED
Viewing Direction6 O’Clock
Driving Scheme1/16 Duty Cycle, 1/5 Bias
Power Supply Voltage5.0 V
VLCD Adjustable For Best Contrast5.0 V (Vop.)
Operating Temperature-20⁰C ~ 70⁰C
Storage Temperature-30⁰C ~ 80⁰C

The board uses different pins than the Arduino example sketches, so to make the display work, use the following sequence of pins when starting the library:
Liquid Crystal lcd(8,9,4,5,6,7);
The buttons are connected to only one analogue input pin through resistors to give a different voltage for each button, thus saving on input and output pins. Reading the buttons is easy, and an example code is shown below.

  • Blue backlight with white words
  • uses the Arduino LCD 4 bit library
  • Left, Right, Up, Down, and Select buttons
  • Screen contrast adjustment
  • Arduino Reset button

Package Included:

  • 1 x  LCD 16×2 Character LCD Display For Arduino

Reviews

There are no reviews yet.

Be the first to review “LCD 16×2 Character LCD Display For Arduino”

Your email address will not be published. Required fields are marked *

You may also like…

Shopping Basket

0

New Multan Electronics